When deciding between a floating ball valve vs trunnion ball valve, it’s important to understand the key differences in their design and application. The main distinction in the floating ball valve vs trunnion ball valve comparison lies in how each valve secures and seals the ball. A floating ball valve relies on line pressure to press the ball against the downstream seat, creating a tight seal. In contrast, a trunnion ball valve uses additional mechanical supports (trunnions) to hold the ball firmly in place, making it ideal for handling higher pressures and larger sizes.
Your choice between a floating ball valve vs trunnion ball valve impacts cost, safety, and long-term performance. Trunnion ball valves account for about 60% of the global market, primarily serving high-pressure and large-diameter applications. Floating ball valves make up the remaining 40%, typically used in smaller systems and moderate pressure conditions. The table below highlights the most important considerations in the floating ball valve vs trunnion ball valve decision:
|
Scenario |
Floating Ball Valve |
Trunnion Ball Valve |
|---|---|---|
|
Industry Scenarios |
Ideal for water treatment |
Preferred for chemical processing |
|
Size and Pressure |
Best for sizes under 8 inches and Class 300 |
Required for sizes over 8 inches and Class 300 |
|
Media and Safety |
Suitable for simple fluids |
Essential for hazardous or corrosive media |
At LIANGGU VALVE, our experts can guide you through the floating ball valve vs trunnion ball valve selection process, ensuring you choose the optimal ball valve solution for your specific system requirements.
Key Takeaways
-
Know the main difference. Floating ball valves use line pressure to seal. Trunnion ball valves have supports to keep them steady.
-
Pick floating ball valves for smaller systems and medium pressure. They cost less and are simple to fix.
-
Use trunnion ball valves for high pressure and big pipes. They give better control and work well for a long time.
-
Think about the price. Floating ball valves usually cost less. Trunnion ball valves cost more but last longer.
-
Always pick the right valve for your system. This keeps things safe and helps everything work best.
Floating Ball Valve vs Trunnion Ball Valve Key Differences
Quick Comparison Table
It is important to know the differences between floating ball valve and trunnion ball valve before you choose one for your project. The table below shows how these two ball valves are not the same. It lists things like design, how they work, pressure range, torque, cost, and where they are used. This table helps you see which valve is better for different jobs.
|
Feature |
Floating Ball Valve |
Trunnion Ball Valve |
|---|---|---|
|
Seal Mechanism |
Ball creates a seal on the downstream side |
Seats create a seal on the upstream side |
|
Structural Support |
Ball floats and moves with pressure |
Ball is fixed with trunnion supports |
|
Pressure Handling |
150-1,480 PSI |
150-6,000+ PSI |
|
Operation Torque |
Increases with higher pressure |
Stays low and stable, even at high pressure |
|
Cost |
Lower initial cost |
Higher cost (1.5-3x more) due to complex design |
|
Typical Applications |
Water treatment, small pipelines, moderate pressure |
Oil & gas, chemical processing, large diameter, high pressure |
Main Distinctions Explained
When you look at floating ball valve and trunnion ball valve, you can see they work in different ways. The floating ball valve uses pressure from the pipe to push the ball against the seat. This makes a tight seal. The ball can move a little, so it is called "floating." You usually find this type in smaller systems and places with medium pressure. You can turn these ball valves by hand or use a machine. When the pressure goes up, it gets harder to turn the valve. For example, at 1,000 PSI, you need three to four times more force than at lower pressure. This is why floating ball valves are not good for very high pressure.
Trunnion ball valves have a ball that does not move because it is held by shafts at the top and bottom. The seats move and press against the ball to make a seal. This keeps the ball steady and makes it easier to turn the valve. You can use trunnion ball valves in pipes with high pressure and big sizes. The force to turn the valve stays about the same, so these valves are good for machines that open and close them. You see trunnion ball valves in oil and gas, chemical plants, and other tough jobs.
The trunnion is different from the floating style because the trunnion ball is held in place by a trunnion at the bottom and a stem at the top. The ball cannot move into the seat to close tightly, so the seat moves to the ball instead.
You also need to think about price when picking between floating ball valve and trunnion ball valve. Trunnion ball valves cost more because they have more parts and need to be made very carefully. You pay about 1.5 to 3 times more for a trunnion ball valve than a floating ball valve of the same size and pressure. The higher price is because of the special design and strong materials needed for high pressure.
When you look at where these valves are used, floating ball valves are best for water treatment, small pipes, and places with medium pressure. Trunnion ball valves are used for dangerous liquids, strong chemicals, and high-pressure jobs. You find them in oil refineries, LNG plants, and big factories.
LIANGGU VALVE sells both floating ball valves and trunnion ball valves. You can pick from many sizes, materials, and types. The company has experts who can help you choose the right valve for your system. You get strong valves, good service, and help with special needs. If you need a floating ball or trunnion mounted ball valve, LIANGGU VALVE can give you the best one for your project.
Now you know the main differences between floating ball valve and trunnion ball valve. You can pick the right one for your system, pressure, and budget. Ball valves are important for controlling liquids, and choosing the right kind keeps your system safe and working well.
Floating Ball Valve Overview
Design and Operation
A floating ball valve has a simple design. The ball sits between two seats inside the valve. When you close the valve, fluid pressure pushes the ball to one side. This makes a tight seal and stops the flow. The ball can move a little to adjust to pressure changes. This helps keep the seal strong and stops leaks. Engineers made the body and seat better to hold more pressure. This gives you good performance, even in tough jobs. LIANGGU VALVE has floating ball valves in many sizes and materials. You can pick the right one for your needs.
Advantages of Floating Ball Valves
Floating ball valves have many good points for your system. The table below shows why people use these ball valves:
|
Advantage |
Description |
|---|---|
|
Cost Efficiency |
Simple design lowers cost and makes the valve more reliable. |
|
Easy Maintenance |
Fewer parts make fixing and caring for the valve easy. |
|
Reliable Sealing Performance |
Great sealing at low and medium pressure keeps things shut tight. |
|
Low Operating Torque |
Less friction means you do not need much force to turn it. |
|
Wide Media Compatibility |
You can use these valves with many fluids if you pick the right material. |
You will see that floating ball valves have a simple build. This means fewer parts touch harsh or rough fluids. Because of this, these valves last longer and need less fixing than other types.
Common Applications
Floating ball valves work in many places. You see them in oil and gas pipes, chemical plants, power stations, and water treatment. They are also used in food, medicine, and HVAC systems. These valves handle low to medium pressure, so they are good for extra systems and general jobs. If you want a valve that shuts off well and is easy to use, this is a good pick. LIANGGU VALVE makes floating ball valves that meet world standards. You can trust them for your important jobs.
Trunnion Ball Valve and Trunnion Mounted Ball Valve
Trunnion Design and Function
A trunnion mounted ball valve is made to be strong and steady. The ball inside does not move around. It stays in one spot because shafts hold it at the top and bottom. These shafts are called trunnions. They keep the ball from moving when pressure changes. This design has some good points compared to floating ball valves:
-
The ball stays in place, so the seal is always steady.
-
Trunnion mounted ball valves do not lose their spot when pressure changes.
-
The trunnion support spreads out the force and keeps the valve safe.
Trunnion ball valves can handle more pressure and bigger sizes than floating ball valves. This makes them a great pick for hard jobs.
Benefits of Trunnion Ball Valves
Trunnion ball valves have many good things, especially in tough places. Here are some reasons to pick a trunnion mounted ball valve:
-
The ball does not move, so you need less force to open or close it, even with high pressure.
-
You can use smaller actuators, which saves space and energy.
-
The valve seals well, so leaks are less likely and your system stays safe.
-
Spring-loaded seats help the valve seal both ways, which gives you more options.
-
Double Block and Bleed lets you work on the valve without stopping the whole system.
-
The strong build meets safety rules for new pipelines.
Trunnion ball valves work well in big pipes and high-pressure jobs. They keep sealing well, even when the pressure is high.
Typical Uses and Industries
Many industries use trunnion ball valves for their most important systems. You see these valves where safety and good work matter most. Here is a table that shows where you might use trunnion mounted ball valves and what they need to do:
|
Industry |
Performance Requirements |
|---|---|
|
Oil & Gas |
High pressure, high flow, and corrosive media handling |
|
Petrochemical Plants |
Reliability under high temperatures and pressures |
|
Power Generation |
Robust flow control and safety in steam, water, and gas pipelines |
|
Mining and Heavy Industries |
Metal seats and trunnion support for abrasive fluids |
|
Marine and Offshore |
Durability and easy maintenance for subsea pipelines |
In these jobs, trunnion ball valves come in sizes from 2 inches to 48 inches. They also come in pressure classes from ANSI 150# to ANSI 2500#. If you need a valve for high pressure, big pipes, or important jobs, you can trust trunnion ball valves from LIANGGU VALVE to work well.
Side-by-Side Comparison: Key Differences
Design and Support Mechanism
When you compare these ball valves, you see they are built differently.
-
Floating ball valves have a ball that can move a little inside. This design is simple and uses fewer parts. The ball floats and shifts when pressure changes. This helps spread the force across the seats.
-
Trunnion ball valves use shafts called trunnions to hold the ball still. The ball stays in the center, even if the pressure goes up or down. This support lets the valve handle more force without hurting the seats.
If you need a valve for high-pressure work, the trunnion type gives you better control.
Sealing and Pressure Handling
These ball valves also seal and handle pressure in different ways.
|
Valve Type |
Sealing Mechanism |
Pressure Handling Characteristics |
|---|---|---|
|
Floating Ball Valve |
Ball pushes against the seat to make a seal. |
Seal gets stronger or weaker as pressure changes. |
|
Trunnion Ball Valve |
Ball stays still; seats move to seal both sides. |
Handles high pressure and keeps the seal steady. |
Leaks at the seat are common in high-pressure jobs. Trunnion ball valves often have special features like emergency sealant and firesafe design. These help keep the seal strong, even if pressure jumps or things get very hot. LIANGGU VALVE has both types with extra sealing choices to keep you safe.
Torque and Operation
You will see a big difference in how hard it is to turn these valves.
-
Floating ball valves need more force to turn as pressure goes up. For example, a 6-inch floating valve at 600 PSI needs 450 ft-lbs of force.
-
Trunnion ball valves need less force, even if the pressure is high. A 6-inch trunnion valve at 1,500 PSI only needs 180 ft-lbs.
This means you can use smaller machines to turn trunnion valves and save energy. LIANGGU VALVE can help you pick the right way to open and close your valve.
Cost and Maintenance
Price and fixing the valve are important when you choose between these types.
-
Floating ball valves usually cost less, especially for small sizes. They are often ready to ship, so you get them faster.
-
Trunnion ball valves cost more because they are more complex. They work best for big or buried pipes. You can fix them from the inside without taking them out, which saves time and money on big jobs.
Tip: For small, low-pressure jobs, floating ball valves save you money and time. For big, high-pressure systems, trunnion ball valves work better and are easier to fix.
LIANGGU VALVE sells both floating and trunnion ball valves. You can find the right one for any job, from simple water pipes to high-pressure oil and gas lines.
Choosing the Right Ball Valve for Your Application
Selection Criteria
You need to pick the best ball valve for your system. First, check your system’s pressure and the fluid type. Look at the pipe size and how often you will use the valve. These things help you choose between floating ball valve and trunnion ball valve. The table below shows how these choices compare:
|
Criteria |
Floating Ball Valve |
Trunnion Ball Valve |
|---|---|---|
|
Cost |
Cheaper for small jobs |
Costs more at first, lasts longer |
|
Size and Pressure |
Good for small pipes and low pressure |
Needed for big pipes and high pressure |
|
Frequency of Operation |
Works well if used sometimes |
Great for lots of use |
|
Media and Safety |
Handles simple fluids |
Good for dangerous or tricky fluids |
|
Automation |
Torque changes more |
Torque stays steady for machines |
|
Space and Weight |
Small and light |
Big and heavy |
|
Budget |
Costs less at first |
Costs more at first, saves money later |
-
Pick floating ball valve for water treatment or small spaces.
-
Choose trunnion ball valve for chemical plants or high-pressure jobs.
-
Use trunnion ball valve for pipes bigger than 8 inches or high pressure.
-
Trunnion ball valve is better for machines that open and close valves.
Tip: Always pick the valve that fits your system. This keeps your system safe and working well.
How LIANGGU VALVE Supports Your Choice
LIANGGU VALVE gives you expert help and many ball valve choices. The company sells floating ball valve and trunnion ball valve in different sizes, pressures, and materials. You can pick from:
|
Parameter |
Range |
|---|---|
|
Size Range |
DN15 - DN1400 (1/2" - 56") |
|
Pressure Class |
150LB - 2500LB (PN10 - PN420) |
|
Temperature Range |
-196°C to +650°C |
|
Body Materials |
Carbon steel, stainless steel, duplex steel, and more |
|
Seat Materials |
PTFE, RPTFE, Nylon, PEEK, metal-to-metal, Devlon |
|
Operation |
Manual, electric, pneumatic, gas-liquid linkage |
You can ask for special sizes, materials, or seals. LIANGGU VALVE gives you technical help, inspection papers, and quick shipping. The team helps you pick the right ball valve for your job. You get strong valves and good service for a long time.
Now you understand how floating and trunnion ball valves are different. Floating ball valves are good for small pipes and medium pressure. Trunnion ball valves are better for big pipes and high pressure. If you need help choosing a valve, ask LIANGGU VALVE. You can visit LIANGGU VALVE’s website or talk to their team for a price and answers you can trust.
FAQ
What is the main difference between a floating ball valve and a trunnion ball valve?
You will see that a floating ball valve lets the ball move slightly to seal. A trunnion ball valve holds the ball in place with supports. This design helps you handle higher pressure and larger pipes.
When should you choose a trunnion ball valve?
You should pick a trunnion ball valve for high-pressure systems, large pipe sizes, or when you need stable torque. These valves work best in oil, gas, and chemical plants.
Can you automate both floating and trunnion ball valves?
Yes, you can automate both types. Trunnion ball valves give you more consistent torque, so they work better with electric or pneumatic actuators in large or high-pressure systems.
How do you select the right ball valve material?
Tip: Always match the valve material to your fluid and temperature. Stainless steel works well for corrosive media. Carbon steel fits water or oil. Ask LIANGGU VALVE for help if you are unsure.