You use a stainless steel trunnion ball valve to control how liquids or gases move in pipes. This valve is very strong and can handle high pressure easily. Many industries use it because it is safe and works well, such as:
-
Oil refineries
-
Petrochemical plants
-
Power generation facilities
-
Water treatment plants
-
Hydrocarbon industries
The trunnion ball valve is different from other valves. It lowers friction, so it is easier to use and works better for hard jobs.
Key Takeaways
-
A stainless steel trunnion ball valve helps control liquids and gases in pipes. It works well when there is high pressure.
-
The trunnion design keeps the ball steady. This means you do not need much force to use the valve. It makes the valve easier to use.
-
These valves last a long time and do not rust easily. They are good for tough places like oil refineries and chemical plants.
-
The double block and bleed feature makes things safer. It lets you do maintenance without turning off the whole system.
-
You need to pick the right valve for your pipe size and pressure. Trunnion ball valves work best in big pipes with high pressure.
What Is a Stainless Steel Trunnion Ball Valve
Simple Definition
You can think of a stainless steel trunnion ball valve as a special type of valve that helps you control the flow of liquids or gases in a pipeline. This valve uses a round ball with a hole through the middle. When you turn the ball, you either let the fluid pass through or block it completely. The trunnion ball valve stands out because it uses a trunnion, which is a support at the bottom and sometimes the top of the ball. This support keeps the ball steady, even when the pressure inside the pipe gets very high. You often see stainless steel trunnion ball valves in places where safety and strength matter most, like oil refineries or power plants.

Main Components
Every trunnion ball valve has several important parts. Each part plays a key role in making sure the valve works smoothly and safely. Here is a simple table to help you understand what each part does:
|
Component |
Role |
|---|---|
|
Ball |
Controls the flow of fluid. |
|
Trunnion |
Stabilizes the ball and absorbs pressure. |
|
Seats |
Form a seal against the ball to prevent leakage. |
|
Stem |
Connects the ball to the actuator or manual handle for operation. |
|
Body |
Encloses the internal components, ensuring durability and protection. |
The ball sits inside the valve body. The trunnion holds the ball in place, so it does not move up or down when you open or close the valve. The seats press against the ball to stop leaks. The stem connects to the ball and lets you turn it with a handle or an actuator. The body keeps everything safe and protected from the outside.
You will find that trunnion mounted ball valves work well in tough jobs because the trunnion valve design reduces the force needed to turn the ball. This makes it easier for you to operate the valve, even when the pipeline is under high pressure.
LIANGGU VALVE stands out as a trusted manufacturer of stainless steel trunnion ball valves. The company uses smart manufacturing and automated production lines to make sure every valve meets high standards. Their process allows for mass customization, so you get reliable trunnion ball valves that fit your needs.
If you need a valve that can handle strong pressure, last a long time, and keep your system safe, a stainless steel trunnion ball valve from LIANGGU VALVE is a smart choice.
How a Trunnion Ball Valve Works
Working Principle
You can understand a trunnion ball valve by looking at how it works step by step. This valve uses a simple quarter-turn motion to control the flow of liquids or gases. Here is how the process works:
-
The valve body holds all the parts together. It keeps everything safe from pressure and temperature changes.
-
Inside the body, you find a round ball with a hole through the middle. When you turn the ball so the hole lines up with the pipe, fluid flows straight through.
-
The ball sits on two trunnions. These supports keep the ball steady and stop it from moving up or down.
-
The stem connects to the top trunnion. When you turn the handle or use an actuator, the stem rotates the ball.
-
The actuator gives the force needed to open or close the valve. You can use a manual handle or an automatic system.
-
The seats press against the ball. They create a tight seal and stop leaks, even when the pressure gets high.
-
Special seals and bearings help the valve move smoothly. They also stop leaks between the parts.
-
Some trunnion ball valves have bleed ports. These let you safely release pressure for maintenance.
When you open the valve, the bore in the ball lines up with the pipeline. This lets the fluid move freely. When you close the valve, the solid side of the ball blocks the flow. The trunnion design helps manage the pressure and keeps the ball in place.
Tip: The quarter-turn action makes this valve quick and easy to use. You only need to turn the handle 90 degrees to go from fully open to fully closed.
Trunnion Support
The trunnion is a key part of this valve. It supports the ball at both the top and bottom. This design gives you several important benefits:
-
The trunnion keeps the ball from shifting when the pressure inside the pipe changes.
-
The pressure from the fluid goes into the valve body, not into the seats or the stem.
-
You need less force to turn the ball, even when the pressure is high.
-
Lower torque means you can use smaller actuators and save energy.
You will notice that this makes the trunnion ball valve a great choice for high-pressure jobs. The valve stays easy to operate, and you do not have to worry about the ball moving out of place.
Opening and Closing
You can open or close a trunnion ball valve quickly and easily. Here is what happens during each step:
-
When you turn the handle or actuator, the stem rotates the ball.
-
If the hole in the ball lines up with the pipe, fluid flows through the valve.
-
If you turn the ball 90 degrees, the solid part blocks the flow and the valve closes.
-
The seats press tightly against the ball, making sure there are no leaks.
-
The trunnion keeps the ball steady, so you get a smooth and reliable action every time.
LIANGGU VALVE uses advanced engineering to make sure every trunnion ball valve works smoothly. You get reliable stem sealing, strong seat performance, and low resistance to flow. The simple structure makes the valve easy to install and maintain. The tight sealing surfaces keep your system safe, even in tough conditions. You can use these valves in many different industries and trust them to last a long time.
|
Feature Description |
Benefit |
|---|---|
|
Reliable valve stem sealing |
Reduces the risk of leaks and seal failure |
|
Good sealing performance of the valve seat |
Keeps the valve working well as pressure increases |
|
Low fluid resistance |
Lets fluid flow easily through the valve |
|
Simple structure and light weight |
Makes installation and handling easier |
|
Tight and reliable sealing surfaces |
Ensures complete shut-off, even in vacuum systems |
|
Fast opening and closing |
Allows for quick adjustments and remote control |
|
Easy maintenance |
Lets you replace parts without much trouble |
|
Sealing surfaces isolated from the medium |
Prevents erosion and extends valve life |
|
Wide range of applications |
Works in many different jobs and industries |
|
Handles media with solid particles |
Keeps working even with challenging fluids |
|
High processing accuracy |
Gives you reliable performance every time |
Note: LIANGGU VALVE designs each trunnion ball valve for top performance and long service life. You can count on these valves for safe and efficient flow control in your system.
Features of LIANGGU VALVE Ball Valves
Stainless Steel Benefits
You get many advantages when you choose a stainless steel ball valve from LIANGGU VALVE. Stainless steel makes the valve strong and reliable. It helps the ball and other parts last longer, even when you use the valve in tough places.
-
Stainless steel contains chromium. This element forms a thin layer on the surface of the ball and valve body. The layer protects the valve from rust and chemical damage.
-
You can use these valves in places with harsh chemicals or saltwater. The passive layer keeps the ball from corroding.
-
Stainless steel ball valves work better than brass or carbon steel valves in tough environments. You see this in oil refineries and seawater systems.
You can trust a stainless steel ball valve to keep working, even when other materials might fail. This means less worry about leaks or breakdowns.
Durability & Pressure Handling
You need a valve that can handle high pressure and last a long time. LIANGGU VALVE designs each ball valve to meet these needs. The strong stainless steel body and ball resist wear and tear. You can use these valves in many different jobs, from water treatment to oil and gas.
-
The valve stands up to high pressure without leaking.
-
The ball stays smooth and easy to turn, even after many uses.
-
You can use the valve in hot or cold places.
Here is a table showing the maximum pressure ratings for LIANGGU VALVE stainless steel trunnion ball valves:
|
Pressure Rating (MPa) |
|---|
|
16 |
|
25 |
You also get a wide range of sizes and pressure classes. LIANGGU VALVE offers ball valves from small to very large, so you can find the right one for your project. Each valve meets strict standards and certifications, so you know you are getting a safe and high-quality product.
Tip: Choose a LIANGGU VALVE stainless steel ball valve for jobs where you need strength, safety, and long service life.
Applications & Trunnion Double Block and Bleed
Common Uses
Trunnion ball valves are used in many industries. These valves help control flow and keep systems safe. They work well in places with high pressure where you need things to be reliable. Here are some places where you find these valves:
-
Oil and gas pipelines
-
Petrochemical plants and refineries
-
Power plants
-
Cooling systems for factories
-
Chemical plants
-
Water treatment centers
-
Mining sites
The trunnion design helps the valve work well in hard jobs. People use these valves for mainline isolation, block stations, and feed lines. In power plants, they are used for cooling water and steam. In mining, they help keep things safe under high pressure. You also see these valves in paper mills, food factories, and medicine plants.
|
Industry |
Specific Applications |
|---|---|
|
Oil and Gas |
Pipelines, block stations, mainline isolation. |
|
Petrochemical |
High-pressure lines, feed lines, isolation near reactors and heat exchangers. |
|
Power Generation |
Cooling water, steam, and other process systems. |
|
Water and Wastewater Treatment |
Important isolation jobs in treatment plants. |
|
Mining |
Jobs that need strong isolation under high pressure. |
|
General Industrial |
Fluid control in paper, food, and medicine factories. |
LIANGGU VALVE has supplied trunnion ball valves for big projects in marine, mining, and factories. You can trust their valves to handle high pressure and keep things safe.
Trunnion Double Block and Bleed Function
The trunnion double block and bleed feature gives extra safety. This design uses two seats to stop fluid from both sides of the ball. There is a bleed valve between the seats. You use this bleed valve to let out or drain trapped fluid. This makes it safer and easier to do maintenance.
-
You can close off a pipe from both sides with double block and bleed.
-
You can let out trapped fluid before fixing the valve.
-
You stop leaks and keep workers safe.
-
You meet strict safety rules like API 6D and ISO 14313.
-
You lower leak risks and cut down on emissions.
The double block and bleed feature lets you check for leaks before working. You make sure the valve is closed tight. You can fix or change parts without shutting down everything. This saves time and keeps your plant running.
Tip: Double block and bleed valves make things safer and easier. They help with maintenance and protect your team.
LIANGGU VALVE makes trunnion ball valves with double block and bleed for high pressure jobs. You see these valves in oil, gas, mining, and marine projects around the world. You get strong isolation, easy maintenance, and good performance every time.
Trunnion vs. Floating Ball Valve
Key Differences
Quarter-turn valves are used in pipelines a lot. The two main types are trunnion ball valve and floating ball valve. Both control flow, but they are built differently. You should know how they are different to pick the best one.
Here is a simple table that shows how these valves compare:
|
Feature |
Floating Ball Valve |
Trunnion Ball Valve |
|---|---|---|
|
Ball support |
Stem only |
Top and bottom trunnions |
|
Sealing mechanism |
Line pressure pushes ball into seat |
Spring-loaded seats press against ball |
|
Typical size range |
Up to 6″ (DN150) |
2″ – 60″+ |
|
Pressure range |
Class 150 – 600 |
Class 150 – 2500 |
|
Operating torque |
Rises sharply with pressure/size |
Stays relatively low |
|
Double Block & Bleed |
Not reliably achievable |
Standard capability |
|
Cavity relief |
Usually self-relieving |
Requires engineered relief |
|
Fire-safe option |
Available |
Widely available |
|
Relative cost |
Lower |
Higher |
|
Typical standard |
ASME B16.34, API 608 |
API 6D, ASME B16.34 |
The trunnion ball valve uses trunnions to hold the ball steady. This makes it easier to turn, even when the pressure is high. Floating ball valves use the stem and seat to support the ball. The ball moves a little to seal, but you need more force as pressure goes up.
Choosing the Right Valve
Think about your project before picking a valve. Look at these things:
-
Size of the pipeline
-
Pressure capability
-
Sealing mechanism
-
Operating torque
-
Cost
-
Safety requirements
Floating ball valves are good for small pipes and medium pressure. They cost less and seal tightly. You use them in water treatment and general industry. They work well when you do not need high pressure.
Trunnion ball valves are best for big pipes and high-pressure jobs. The trunnion keeps the ball steady and makes it easier to turn. You use these valves in oil and gas, power plants, and chemical factories. They handle tough jobs and give extra safety with double block and bleed.
LIANGGU VALVE sells both types. Floating ball valves cover sizes from DN15 to DN250 and pressures up to 1500LB. Trunnion ball valves range from DN50 to DN1400 and pressures up to 2500LB. You can find the right valve for your job, whether you need something small or strong.
Tip: Use a floating ball valve for small, low-pressure jobs. Pick a trunnion ball valve for big, high-pressure, or important jobs.
LIANGGU VALVE gives you reliable valves. Their products work in many industries and help you find the best solution for your project.
You have learned that a stainless steel trunnion ball valve works well. It seals tightly, lasts a long time, and is simple to use. This valve holds the ball at both ends. This makes it easier to turn and needs less force. The table below shows the main features and their benefits:
|
Feature |
Benefit |
|---|---|
|
Trunnion Design |
Easy operation, less torque |
|
Corrosion Proof |
Lasts longer in tough jobs |
|
Strong Sealing |
Reduces leaks, boosts safety |
When you pick a ball valve, remember LIANGGU VALVE has good options for your needs. If you clean and check your valve often, it can last up to 30 years. Using stainless steel helps the planet because it makes less waste.
FAQ
What is the main advantage of a trunnion ball valve?
You get lower operating torque. The trunnion holds the ball steady. This makes the valve easy to turn, even when the pressure is high.
How do you know if you need a trunnion or floating ball valve?
Check your pipeline size and pressure. For large pipes or high pressure, you should pick a trunnion ball valve. For small pipes and lower pressure, a floating ball valve works well.
Can you use a stainless steel trunnion ball valve with seawater?
Yes, you can. Stainless steel resists rust and corrosion. You can use these valves in marine systems and saltwater environments.
How long does a trunnion ball valve last?
With proper care, you can use a trunnion ball valve for up to 30 years. Regular cleaning and checks help the valve last longer.
Where can you buy LIANGGU VALVE trunnion ball valves?
You can visit the official LIANGGU VALVE website to see products, get details, or request a quote.
